Is this filter possible or impossible to code?

The problem I'm having appears to be luminance banding. Old VHS tapes and also my analog cable on certain channels I get this interference band across the whole screen horizontally and it slowly rolls. It is brighter in the middle and then fades above and below to a normal picture. The color is fine just brighter in this band. I can get rid of it in Photoshop perfectly by doing a inverse gradient fill over the band in the luminance channel so i know it is possible but how to do it in an algorithm for use in a filter is beyond me. here is an example clip of what i mean . It is 6 megs DivX 5.0.3 and no filters. My thoughts are the banding should be detectable because it is a straight horizontal band across the whole screen and rolls very slowly and at a steady pace. This is something you see in footage itself almost never so I thought its movement should be detectable temporally. Can any of you gurus here take a look at the clip and tell me if you think a filter like that is possible and worth doing? Are there any band removers filters out there that i missed? So far the best filter to at least soften the bands without destroying the the rest of the picture via blurring and ghosting is Pixiedust filter. Thanks Zep

Very difficult. :( Have you tried playing it on more than one TV? Sometimes the problem is actually bad capacitors in the TV's power supply.

This interference comes from the cable company. The VCR tuner picks it up, my TVs pick it up (all three of them) and of course the direct feed into my ATI 8500 all in wonder picks it up. The cable itself goes into a basic splitter then 4 cables from there run to different rooms in my house. I tested before the splitter and same thing. It occurs only on certain channels. basically channel 2 to channel 14 which happen to be where cbs, abc , nbc, wb, and fox are lol all channels above 14 are rock solid but those channels have hardly anything worth watching :) The problem is it is analog cable TV feed and not digital. Some days it is fine and others i get 4 bands but most of the time it is what you see in clip I posted. Thanks for taking a look and i know if you think it is very difficult then it must be since you make some of the best filters. Oh there is one interesting thing i found after i posted. Temporal cleaner detects the motion VERY WELL but cleaning up the bands it can not do since to get rid of them you have to crank up the thresholds so much you destroy the whole picture. Turning on lock luminance pixels works very well but then leaves trails/ghosting all over place on other real motion.

This looks alot like electrical interference to me... to me it just screams ground loop. Try for more general info...

Will it came i installed it and $70 down the drain. It was a jensen hum bar remover. worthless grrr....... the only thing it MAYBE did was to soften the hum bars a little. (I could be fooling myself via placebo effect lol) oh well live and learn :)

That's no good! At least you have time to return it ;)

problem solved!!! Turns out my water pipes just are not so great for grounding modern tech. So the cable tv guys came out and to my house and said i should install a ground rod and get the cable off of the cold water pipe wich everything is grounded to in the house as well as the electric company meter on outside of the house etc... So i did. 8ft steel rod and sledge hammer and a little while later ground rod installed. (Hard work hammering that sucker into the ground. needed to go in at least 6ft) ran a wire from ground rod to cable tv in box on outside of house and presto!!! rock solid pitcure on all channels no need for over filtering now :)

So it was a ground loop problem ;) Glad to hear you solved it.

yep it was my guess is since everything in my house is grounded to the cold water pipe that something is leaking voltage back and the water pipe just wasn't good enough to ground it. Now with the cable TV on its own ground the picture is rock solid and super sharp. cool :) might help my cable modem too which is also on the same cable