My a103 is dead long live my a103..not half

=== Scsi-Device-Map === DiskPeripheral : Maxtor 53073H6 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-24102B atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-103 atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On DiskPeripheral : SEAGATE ST19171W SUN9.0G0776 aic78xx Port 2 ID 3 DMA: ? CdRomPeripheral : PLEXTOR CD-R PX-W124TS1.07 aic78xx Port 2 ID 4 DMA: ? CdRomPeripheral : PLEXTOR CD-ROM PX-32TS 1.03 aic78xx Port 2 ID 5 DMA: ? DiskPeripheral : Maxtor 5T060H6 TAH7 ultra Port 3 ID 0 DMA: ? DiskPeripheral : MAXTOR 6L040J2 A93. ultra Port 3 ID 1 DMA: ? you have 5 cd or dvd devices and 4 HDs, 4 of them on IDE rest on SCSI if I'm getting this right and A03 as secondary master, hmm.... should work. Did you change your configuration in any way recently, add or swap disk drive, cd-rom, dvd ?

no error 

I get no error when doing a x2 test in prassi in pio or dma mode?

did you add anything other to the computer, how strong is your power supply, those 7 devices can be as much as 150W alone, add AMD at 50-70W, MB 30W, VGA ? depends..... I have AMD XP 2000+, Geforce 4Ti, DVD-ROM, DVD-R, CD-R, 2x IBM 45GB RAID, GB 7VRXP, Firewire card and this setup would not work on few 300W power supplys I tested, eventualy got 360W. If your power supply is bellow 400W I would try to turn of unnecesary drives and try to burn again. Well ?? :confused:

did you get the pm m8

got a 400watt job 

got a 400watt job, but yes I supose i'm pushing it, network card ati radion, fire wire, modem, sb live, external scsi h/d, internal scsi 2940 u/w...etc ...aint no slots left..lol

yes i did. hmm... did you try to get dongrade package from here: and tried to downgrade in DOS ?? and really try to turn of couple of drives, who knows, maybe power supply just had enough... ?

GETTING BETTER 

I'm glad it works ? I would never think of that :)